Advantages of silk screen ink leveling agent
Advantages of silk screen ink leveling agent
The advantages of silk screen ink leveling agent are mainly reflected in the three dimensions of printing quality improvement, process optimization and product performance enhancement. Its technical value runs through the entire printing process. The specific advantages are as follows:
I. Improved printing quality
Surface defect elimination
Leveling agent can eliminate defects such as orange peel, shrinkage, and pinholes by reducing the surface tension of ink. For example, in plastic film printing, leveling agent can improve the surface smoothness of ink by more than 50% and reduce the rate of manual rework.
Enhanced pattern clarity
Leveling agent can improve the fluidity of ink and make the dot restoration more accurate. In high-screen printing of 200 lines/inch, leveling agent can reduce the dot expansion rate from 15% to 8% and increase color saturation by 20%.
Color consistency guarantee
Leveling agent can avoid color difference caused by uneven drying of ink during printing. In multi-color overprinting, leveling agent can reduce the color difference ΔE value from 3.5 to 1.2, meeting the color management requirements of high-end packaging.
II. Optimize process efficiency
Improve drying speed
Leveling agents can promote solvent volatilization or UV light curing, shortening the drying time. For example, in solvent-based inks, leveling agents can shorten the drying time by 30%-40%, improving the production efficiency of printing machines.
Reduce ink consumption
Leveling agents can reduce ink viscosity, enhance wettability, and reduce ink transfer. Under the same printing effect, leveling agents can reduce ink consumption by 10%-15%, reducing production costs.
Enhanced printing adaptability
Leveling agents can improve the wettability of inks on different substrates and reduce the time for plate change and debugging. For example, in the printing of mixed metal and plastic substrates, leveling agents can increase the printing pass rate from 70% to 95%.
III. Enhanced product performance
Improved wear resistance
Leveling agents can form a dense ink layer and enhance the scratch resistance of printed products. In touch screen panel printing, leveling agents can increase the number of passes in the wear resistance test from 500 to 2000 times.
Enhanced chemical resistance
Leveling agents can improve the ink's tolerance to acids, alkalis and solvents. In the printing of automotive interior parts, leveling agents can prevent the ink from fading after being immersed in a 5% sodium hydroxide solution for 72 hours.
Improved anti-adhesion
Leveling agents can reduce the viscosity of the ink surface to prevent adhesion when printed products are stacked. In food packaging printing, leveling agents can reduce the unpacking breakage rate from 8% to 1%.
IV. Special function realization
High-precision printing support
Leveling agents can control the ink thickness within the range of ±2μm, meeting the micron-level precision requirements of IC packaging, semiconductors, etc. For example, in wafer-level packaging (WLP), leveling agents can reduce the line spacing error from ±5μm to ±1μm.
Functional ink optimization
In conductive inks and luminous inks, leveling agents can balance the distribution of functional particles and improve printing uniformity. For example, in touch screen electrode printing, leveling agents can reduce resistance fluctuations from ±15% to ±5%.
Improved environmental performance
Leveling agents can promote the drying of water-based inks and reduce VOCs emissions. In water-based label printing, leveling agents can reduce VOCs content from 150g/L to 30g/L, which meets environmental regulations.
V. Economic benefits and market competitiveness
Cost savings
By reducing ink usage, reducing scrap rates and improving production efficiency, the comprehensive cost savings of leveling agents can reach 15%-25%.
Increased product added value
Leveling agents can achieve special effects such as high gloss, high wear resistance, and anti-fingerprint, and enhance product market competitiveness. For example, in high-end cosmetic packaging printing, leveling agents can increase product premium rates by 30%.
Enhanced process flexibility
Leveling agents are compatible with a variety of printing processes (screen, pad printing, hot stamping, etc.), reducing equipment investment and shortening product development cycles.
VI. Technology development trends
Nano-leveling agents
Nano particles can achieve finer ink control and promote printing accuracy to submicron levels.
Bio-based leveling agent
The application of bio-based materials can further improve environmental performance and meet the needs of sustainable development.
Intelligent leveling agent
Through responsive molecular design, dynamic adjustment of leveling performance is achieved to adapt to complex printing environments.
Screen printing ink leveling agent has evolved from a simple surface defect repair tool to a core additive in the printing process. Its technical advantages are not only reflected in quality improvement, but also become a key technical support for promoting the transformation of the printing industry to high efficiency, environmental protection and intelligence. With the advancement of materials science, the functional boundaries of leveling agents will continue to expand, creating more possibilities for the printing industry.