Modified mineral oil polymer

HR-8310 water-based defoamer

Modified mineral oil polymer

Characteristics and advantages :

Applicable to various water-based systems, will not produce pinhole, shrinkage and other undesirable phenomena. Excellent defoamability and foam inhibition, does not affect recoating, does not affect adhesion. Good compatibility and miscibility. No delamination.

Overview：

Suitable for a variety of aqueous systems, excellent defoamability, foam inhibition, good compatibility, miscibility, will not produce pinholes, shrinkage and other undesirable phenomena, does not affect the recoating, do not affect the adhesion.

Technical data

Appearance (visual inspection) white to light yellow liquid

          Relative density (25℃) 0.82-0.93

          Viscosity (CS, 25℃) 70～150

Note: The values listed in this data sheet only describe the typical properties of the product, and do not represent the company's technical standards.

Application Areas ;Suitable for all kinds of aqueous systems

Usage: Add water to form emulsion, can be used after dilution, can be added directly to the paint under the condition of stirring, so that the defoamer is fully mixed.

Recommended dosage:

The recommended dosage of this product is 0.1-0.5% (according to the total formula). It is recommended to test before use to determine the best use and dosage.

Packing specification :25KG

Storage and transportation:

This product is non-hazardous, the container should be sealed strictly after use. The product is valid for two years.

Note:

The product may be layered after a long period of time, please mix well before use, the layering does not affect the use of the effect.