water-based mineral oil defoamer

HR-8410 water-based mineral oil defoamer

Modified mineral oil polymer

Properties and advantages: excellent compatibility, miscibility, excellent defoaming and foam inhibition, does not affect the recoating, do not affect the adhesion, will not produce pinholes, shrinkage and other undesirable phenomena, suitable for a variety of water-based systems

Overview ：

Suitable for a variety of aqueous systems, foam inhibition, excellent compatibility, miscibility, high efficiency defoaming, will not produce pinholes, shrinkage and other undesirable phenomena, does not affect the recoating, do not affect the adhesion.    

Technical Data

Appearance (visual inspection): white to light yellow liquid

          Relative density (25℃) 0.82-0.90

          Active ingredient 98%

Note: The values listed in this data sheet only describe the typical properties of the product, and do not represent the company's technical standards.

Application Areas :Applicable to all kinds of water-based systems

Usage: Add water to form emulsion, can be used after dilution, can be added directly to the paint under the condition of stirring, so that the defoamer is fully mixed.

Recommended dosage :

The recommended dosage of this product is 0.1-2% (according to the total formula). It is recommended to test before use to determine the best use and dosage.

Packing specification :25KG

Storage and Transportation :

This product is non-hazardous, the container should be strictly sealed after use. The product is valid for two years.

Note: The product may be layered after a long period of time, please mix well before use, the layering does not affect the use of the effect.