Welcome to Dongguan Hongrui Chemical Co., Ltd

France Differences in water-based mineral oil Free of silicone defoamers(2)

2023-05-01

pigment

leveling

foam

dispersant

The water-based mineral oil Free of silicone defoamershas a fast defoaming speed and a foam inhibiting effect of up to several hours, which is also well matched with the foam system. It can be carried out in harsh environments such as high temperatures and strong alkalis, with good results. After use, there will be no phenomena such as oil bleaching and demulsification

anti-floating

dispersant

Elimination of foam
(1) Physical methods
From the physical point of view, the methods to eliminate foam mainly include placing baffle or filter screen, mechanical agitation, static electricity, freezing, heating, steam, radiation, high-speed centrifugation, pressure reduction, high-frequency vibration, instantaneous discharge and ultrasound (acoustic liquid control). These methods promote the gas transmission rate at both ends of the liquid film and the liquid discharge of the bubble film to varying degrees, making the stability factor of foam less than the attenuation factor, As a result, the number of foam gradually decreased. However, the common disadvantage of these methods is that their use is strongly restricted by environmental factors, and the defoaming rate is not high. The advantages are environmental protection and high reuse rate.

Application and selection of water-based mineral oil defoamers:

替换城市  Waterborne mineral oil Free of silicone defoamers are suitable for use in water-based systems with weak emulsifying properties, such as latex paints, coatings, adhesives, inks, and other systems with low emulsifying properties. They are easy to emulsify and form uniform distribution in water-based systems, thereby reducing the likelihood of surface defects such as shrinkage and loss of gloss, and also reducing microbubbles. However, it should be noted that mineral oils and waxes, which contain a small amount of organosilicon, and adopt special preparation processes, have excellent product storage stability, and are not prone to separation or sedimentation even after long-term storage.