Main components of mineral oil paint defoamer Marshall Islands(1)

UV

recoating

repellant

The main component of mineral oil paint defoamer Marshall Islands is mineral oil, or any other oil that is insoluble in the foaming medium, as the carrier, accounting for approximately 50% to 70%. Its specific gravity is the key. Too much will affect its solubility and emulsification, while too little will affect its stability and effectiveness.

A substance that can reduce the surface tension of water, solution, suspension, etc., prevent the formation of foam, or reduce or eliminate the original foam. [1]
Defoaming agents should have the following properties: ① strong defoaming power and low dosage; ② Adding to the foaming system does not affect the basic properties of the system, i.e. does not react with the defoaming system; ③ Low surface tension; ④ Good balance with the surface; ⑤ Good heat resistance; ⑥ Good diffusion and permeability, high positive spreading coefficient; ⑦ Chemical stability, strong oxidation resistance; ⑧ Good gas solubility and permeability; ⑨ Low solubility in foaming solutions; ⑩ No physiological activity, high safety

agent

Inorganic hydrophobic particles account for about 10% of the total, and they are evenly dispersed in mineral oil, which is one of the key factors because their hydrophobic strength determines the effectiveness of defoaming performance, which can help paint defoamer Marshall Islands factors reach the surface of the liquid film more easily, allowing the defoaming agent to quickly blend with the liquid film to increase defoaming speed.