替换城市 Principle and influencing factors of special UV curing defoamer agents for paints(3)

does

Most surfactants used in coatings tend to be functionally incompatible with UV curing defoamer. In particular, emulsifiers, wetting and dispersing agents, leveling agents, thickeners, etc. can have an impact on the effectiveness of defoamers. Therefore, when coordinating various additives, it is necessary to pay attention to the relationship between different additives and select a good balance point.

carbon

Organosilicon type
silicone oil
The commonly used silicone oils include polydimethylsiloxane and polymethylphenylsiloxane. Polydimethylsiloxane is used in paints and inks. Although polymethylphenylsiloxane has good compatibility, it does not have the ability to control surface state, so it is basically not used in leveling agents, and is mostly used for high-temperature resistance

toner

carbon

Baking temperature

When the paint is baked at high temperature at room temperature, its viscosity will drop at the beginning, and bubbles can move to the surface. However, because of the volatilization of solvent, the curing of paint, and the increase of surface viscosity, the foam will become more stable and retain on the surface, resulting in shrinkage and pinholes. Therefore, the baking temperature, fixing speed, and solvent volatilization rate also have an impact on the effect of defoamer.