Barbados Application of UV curing defoamer Agent in Sand Washing Wastewater Treatment(2)

leveling

chemical

agent

A substance that can reduce the surface tension of water, solution, suspension, etc., prevent the formation of foam, or reduce or eliminate the original foam. [1]
Defoaming agents should have the following properties: ① strong defoaming power and low dosage; ② Adding to the foaming system does not affect the basic properties of the system, i.e. does not react with the defoaming system; ③ Low surface tension; ④ Good balance with the surface; ⑤ Good heat resistance; ⑥ Good diffusion and permeability, high positive spreading coefficient; ⑦ Chemical stability, strong oxidation resistance; ⑧ Good gas solubility and permeability; ⑨ Low solubility in foaming solutions; ⑩ No physiological activity, high safety

ink

penetrating

Barbados When general sand washing plants are carrying out sewage treatment, they should start to add chemicals to assist after the completion of sediment separation, fine sand extraction and other work. However, the complex composition of such chemicals combined with the influence of external factors will produce foam in sand washing wastewater treatment, which will bring only disadvantages but no benefits. For the treatment of sediment and sand washing wastewater, the sand washing wastewater treatment defoamer can not be more appropriate to eliminate the foam problem. It is targeted at the foaming mechanism and link system of the sand washing system. The finished products are mainly refined from organosilicon, polyether and other core components. Directly adding at the water inlet will not affect the separation and cleaning of sediment and other sediment,

Barbados In addition, the sand washing wastewater treatment UV curing defoamerr can also be used for the wastewater after sediment cleaning. This system is different from wastewater treatment. In order to make the sediment cleaning effect better, the staff will add stabilizer and cleaning agent to assist in cleaning. The foaming factor in these additives is also one of the culprits for the emergence of a large number of foam. The polyethers in the sand washing wastewater treatment UV curing defoamer are specially designed for the sediment cleaning system, mainly to solve the foam in the process of water circulation washing sediment, and also applicable to the water treatment stage in the mud water separation.