替换城市 Principle and influencing factors of special paint defoamer agents for paints(1)

UV

reducing

epoxy

替换城市  Principle of special paint defoamer for paints:

Elimination of foam
(1) Physical methods
From the physical point of view, the methods to eliminate foam mainly include placing baffle or filter screen, mechanical agitation, static electricity, freezing, heating, steam, radiation, high-speed centrifugation, pressure reduction, high-frequency vibration, instantaneous discharge and ultrasound (acoustic liquid control). These methods promote the gas transmission rate at both ends of the liquid film and the liquid discharge of the bubble film to varying degrees, making the stability factor of foam less than the attenuation factor, As a result, the number of foam gradually decreased. However, the common disadvantage of these methods is that their use is strongly restricted by environmental factors, and the defoaming rate is not high. The advantages are environmental protection and high reuse rate.

wetting

Good paint defoamers not only have a good defoaming effect in paint systems, but also maintain defoaming ability at room temperature and under heating environments. In addition, it cannot be compatible with foam system. If the compatibility is good, it will help to produce foam. While the paint paint defoamer has good dispersibility in the foaming system, specifically refers to the uniform and smooth diffusion of the defoamer on the surface, which can cover the foam to achieve the elimination effect. Its working principle is to reduce the surface tension of the liquid around the foam, so that small foam can gather into large foam, and finally foam will burst.