Uganda Differences in Industrial Cleaning ink defoamer(1)

epoxy

wetting

unstable

Uganda There are two ways to eliminate foam:

dispersant

Leveling principle
The compatibility of acrylic leveling agents is an important indicator of their ability to control the surface state of the coating film. The compatibility is too good to dissolve in the coating film, which will not form a new interface on the surface of the coating film and provide no leveling effect; Due to poor compatibility, it is impossible to uniformly distribute on the surface of the coating film, which can gather together and easily cause shrinkage defects. It can reduce the gloss of the coating film and produce adverse side effects such as fog and shadow. Only with ideal controlled compatibility can a new interfacial layer be formed on the surface of the coating film, playing a leveling role

From the physical point of view, the methods to eliminate foam mainly include placing baffle or filter screen, mechanical agitation, static electricity, freezing, heating, steam, radiation, high-speed centrifugation, pressure reduction, high-frequency vibration, instantaneous discharge and ultrasound (acoustic liquid control). These methods promote the gas transmission rate at both ends of the liquid film and the liquid discharge of the bubble film to varying degrees, making the stability factor of foam less than the attenuation factor, As a result, the number of foam gradually decreased. However, the common disadvantage of these methods is that their use is strongly restricted by environmental factors, and the Uganda rate is not high. The advantages are environmental protection and high reuse rate.