Main components of mineral oil paint defoamer North Macedonia(1)

water-based

The main component of mineral oil paint defoamer North Macedonia is mineral oil, or any other oil that is insoluble in the foaming medium, as the carrier, accounting for approximately 50% to 70%. Its specific gravity is the key. Too much will affect its solubility and emulsification, while too little will affect its stability and effectiveness.

high

Leveling

Elimination of foam
(1) Physical methods
From the physical point of view, the methods to eliminate foam mainly include placing baffle or filter screen, mechanical agitation, static electricity, freezing, heating, steam, radiation, high-speed centrifugation, pressure reduction, high-frequency vibration, instantaneous discharge and ultrasound (acoustic liquid control). These methods promote the gas transmission rate at both ends of the liquid film and the liquid discharge of the bubble film to varying degrees, making the stability factor of foam less than the attenuation factor, As a result, the number of foam gradually decreased. However, the common disadvantage of these methods is that their use is strongly restricted by environmental factors, and the defoaming rate is not high. The advantages are environmental protection and high reuse rate.

Inorganic hydrophobic particles account for about 10% of the total, and they are evenly dispersed in mineral oil, which is one of the key factors because their hydrophobic strength determines the effectiveness of defoaming performance, which can help paint defoamer North Macedonia factors reach the surface of the liquid film more easily, allowing the defoaming agent to quickly blend with the liquid film to increase defoaming speed.