替换城市 Principle and influencing factors of special UV curing defoamer agents for paints(2)

dispersant

Good paint defoamers not only have a good defoaming effect in paint systems, but also maintain defoaming ability at room temperature and under heating environments. In addition, it cannot be compatible with foam system. If the compatibility is good, it will help to produce foam. While the paint UV curing defoamer has good dispersibility in the foaming system, specifically refers to the uniform and smooth diffusion of the defoamer on the surface, which can cover the foam to achieve the elimination effect. Its working principle is to reduce the surface tension of the liquid around the foam, so that small foam can gather into large foam, and finally foam will burst.

agent

Alkyl modified organosiloxane
As mentioned earlier, polyether modified polysiloxanes have some shortcomings; Alkyl modified polysiloxanes have precisely these advantages.
This series of polysiloxane products also belong to the comb structure. The molecular weight of this type of product is relatively small, around 10000, and n+m is about 30-50. The main purpose of modifying with alkyl is to improve thermal stability, compatibility, and unstable foaming, and even to have defoaming functions. However, as the modified alkyl chain increases, its ability to reduce surface tension also decreases

Foam

Agent

Defoaming agents are widely used in food industry, paper industry, water treatment, oil extraction industry, printing and dyeing industry, coating industry, detergent industry, rubber latex industry, aerosol industry, daily chemical industry, pharmaceutical industry, dairy industry, etc. [2]

silicone

Influencing factors of special defoaming agents for paints:

powder

surface tension

替换城市  The level of coating surface tension has a significant impact on defoaming agents. The surface tension of defoaming agents is lower than that of coatings, otherwise they cannot have defoaming and antifoaming effects. The surface tension of a coating is a variable factor, so when selecting defoamers, it is necessary to maintain a constant surface tension, taking into account the surface tension variation factor.

Effects of other additives

Most surfactants used in coatings tend to be functionally incompatible with UV curing defoamer. In particular, emulsifiers, wetting and dispersing agents, leveling agents, thickeners, etc. can have an impact on the effectiveness of defoamers. Therefore, when coordinating various additives, it is necessary to pay attention to the relationship between different additives and select a good balance point.