Jamaica Differences in Industrial Cleaning UV curing defoamer(2)

agent

water-based

agent

anti-delamination

matte

dispersant

There is no unified understanding of the mechanism of defoaming agents. According to the mechanism of defoaming agents proposed by predecessors, there are generally the following types: [4]
General defoaming mechanism
Typical defoaming mechanisms with a broad overview are the Robinson defoaming mechanism and the Ross hypothesis. Among them, Robinson mechanism is the basis of Ross hypothesis, which mainly emphasizes the liquid drainage of defoamer destroying foam and Marangoni effect to realize defoaming; The Ross hypothesis is based on the fact that the defoamer particles are insoluble droplets, while some defoamers actually produce defoaming effects in a dissolved state, so the defoaming mechanism of the Ross hypothesis is not comprehensive

titanium

From the physical point of view, the methods to eliminate foam mainly include placing baffle or filter screen, mechanical agitation, static electricity, freezing, heating, steam, radiation, high-speed centrifugation, pressure reduction, high-frequency vibration, instantaneous discharge and ultrasound (acoustic liquid control). These methods promote the gas transmission rate at both ends of the liquid film and the liquid discharge of the bubble film to varying degrees, making the stability factor of foam less than the attenuation factor, As a result, the number of foam gradually decreased. However, the common disadvantage of these methods is that their use is strongly restricted by environmental factors, and the Jamaica rate is not high. The advantages are environmental protection and high reuse rate.

Jamaica The chemical methods to eliminate foam mainly include chemical reaction method and adding Jamaica. The chemical reaction method refers to the chemical reaction between the foaming agent and the foaming agent by adding some reagents to generate water insoluble substances, thus reducing the concentration of surfactant in the liquid film and promoting the rupture of foam. However, this method has some shortcomings, such as the uncertainty of foaming agent composition and the harm of insoluble substances to system equipment. Nowadays, the widely used defoaming method in various industries is the method of adding defoaming agents. The advantages of this method are high foam breaking efficiency and convenient use, but finding suitable and efficient defoaming agents is the key.