Welcome to Dongguan Hongrui Chemical Co., Ltd

Burundi Types of ink defoamer for Beer Bottle Cleaning How much is it per kilogram (2)

2023-04-11

Unstable

affect

Powder

oil

adhesion

agent

powder

Burundi The ink defoamer powder used for beer bottle cleaning and defoaming is also one of these types. This type of cleaning and defoaming agent is developed using silicone polyether as the main raw material, combined with a variety of additives. With low dosage, convenient operation, and easy solubility in water, there is no need to mention the  ink defoamer and foam inhibiting properties. The main thing is to value the good dispersion of such  ink defoamer agents, which will not affect the transparency and appearance performance of the product. Good compatibility with various surfactants used in beer bottle cleaning, while not reducing the cleaning effect, solves the problem of spot residue, and has no side effects on subsequent processing. The amount of defoamer added for beer bottle cleaning is one thousandth to three thousandths, but the final amount should be determined according to the cleaning water volume of different manufacturers and the content of detergent. Powdery defoamer can be added to the foam surface after the powder and water are boiled.

agent

Polyether polyester modified organosiloxane
An organic polysiloxane with a comb like structure. N+m is about 50-250, and the molecular weight is controlled between 1000-150000. Its compatibility is adjusted by polyethers and polyesters, and the longer the chain, the better the phase compatibility. Polyether modifications are the most common in this category, typically using ethylene oxide and propylene oxide. With the increase of the content of ethoxy groups, their compatibility with water also improves, so it is also possible to synthesize water-soluble siloxane type leveling agents. Ethylene oxide and propylene oxide can be used alone or mixed to control hydrophilicity and lipophilicity. If both ethoxy and propoxy groups are contained, a silicone based leveling agent for both water and oil use is prepared,

silver

Burundi It is also worth noting how to select  ink defoamer for beer bottle cleaning. Firstly, they must be insoluble in the foaming liquid and have a lower surface tension than the foaming liquid, so that defoamers can play a role. Then, it should have a certain affinity with the foaming liquid. The defoaming process is actually a competition with the foam production. Only by rapidly dispersing the effect in the starting liquid can we achieve the goal of defoaming. The active component of the defoamer is too hydrophilic to the foaming liquid and will dissolve; Too sparse and difficult to disperse. Only when intimacy is appropriate can effectiveness be good. Finally, it is not allowed to react chemically with the foaming liquid, otherwise harmful substances may breed and affect product performance