Welcome to Dongguan Hongrui Chemical Co., Ltd

Main components of mineral oil ink defoamer Finland(1)





The larger the molecular weight, the stronger the control ability of its surface state, and the better its skid resistance and adhesion resistance, such as the 1070 and 1071 series products of the friction chemical industry.
There are two methods for bonding modified polyester or polyether to siloxanes: one is a silicon oxygen bond; The other is silicon carbon chains, which generally have less thermal stability and water resistance than the latter.
The compatibility of polyether and polyester modified siloxanes with resins has been greatly improved, reducing surface tension, controlling surface flow, increasing slip resistance, anti shrinkage, and anti adhesion. Some products also have interlayer adhesion issues. In particular, polyether modified polysiloxanes have poor thermal stability and are prone to foam stabilization. It is important to pay attention to the negative effects of these products when applying them.

The main component of mineral oil ink defoamer Finland is mineral oil, or any other oil that is insoluble in the foaming medium, as the carrier, accounting for approximately 50% to 70%. Its specific gravity is the key. Too much will affect its solubility and emulsification, while too little will affect its stability and effectiveness.


Inorganic hydrophobic particles account for about 10% of the total, and they are evenly dispersed in mineral oil, which is one of the key factors because their hydrophobic strength determines the effectiveness of defoaming performance, which can help ink defoamer Finland factors reach the surface of the liquid film more easily, allowing the defoaming agent to quickly blend with the liquid film to increase defoaming speed.