Tajikistan Differences in Industrial Cleaning Free of silicone defoamers(2)

does

water-based

carbon

agent

wetting

dispersant

From the physical point of view, the methods to eliminate foam mainly include placing baffle or filter screen, mechanical agitation, static electricity, freezing, heating, steam, radiation, high-speed centrifugation, pressure reduction, high-frequency vibration, instantaneous discharge and ultrasound (acoustic liquid control). These methods promote the gas transmission rate at both ends of the liquid film and the liquid discharge of the bubble film to varying degrees, making the stability factor of foam less than the attenuation factor, As a result, the number of foam gradually decreased. However, the common disadvantage of these methods is that their use is strongly restricted by environmental factors, and the Tajikistan rate is not high. The advantages are environmental protection and high reuse rate.

Leveling principle
The compatibility of acrylic leveling agents is an important indicator of their ability to control the surface state of the coating film. The compatibility is too good to dissolve in the coating film, which will not form a new interface on the surface of the coating film and provide no leveling effect; Due to poor compatibility, it is impossible to uniformly distribute on the surface of the coating film, which can gather together and easily cause shrinkage defects. It can reduce the gloss of the coating film and produce adverse side effects such as fog and shadow. Only with ideal controlled compatibility can a new interfacial layer be formed on the surface of the coating film, playing a leveling role

Tajikistan The chemical methods to eliminate foam mainly include chemical reaction method and adding Tajikistan. The chemical reaction method refers to the chemical reaction between the foaming agent and the foaming agent by adding some reagents to generate water insoluble substances, thus reducing the concentration of surfactant in the liquid film and promoting the rupture of foam. However, this method has some shortcomings, such as the uncertainty of foaming agent composition and the harm of insoluble substances to system equipment. Nowadays, the widely used defoaming method in various industries is the method of adding defoaming agents. The advantages of this method are high foam breaking efficiency and convenient use, but finding suitable and efficient defoaming agents is the key.